.: Advantages and Disadvantages of Etching with Beam-Steered Laser
Category:Home / Computers / Hardware
This year, over one-third of all material processing lasers will be installed for product or package marking applications. Since their introduction in the early-1970's, laser markers have evolved as an effective tool for manufacturers who require a combination of speed, permanence, and image flexibility not available from more traditional marking technologies.
Two marking system designs have emerged with notably different strengths and weaknesses. Careful consideration of these laser and imaging optics combinations can provide the optimum tool for a wide range of marking requirements.
Process Fundamentals
Laser marking is a thermal process that employs a high-intensity beam of focused laser light to create a contrasting mark. The laser beam increases the surface temperature to induce either a color change in the material and/or displace material by vaporization to engrave the surface. Both marking system configurations utilize this principle of surface modification but differ in the method used to project the laser beam and create the marking image.
The beam-steered laser marker provides the greatest degree of image manipulation. To create the marking image, two beam-steering mirrors mounted on high-speed, computer-controlled galvanometers direct the laser beam across the target surface. Each galvanometer provides one axis of beam motion in the marking field. The beam projects through a multi-element, flat-field lens assembly after reflecting off the final steering mirror. The lens assembly focuses the laser light to achieve the highest power density possible on the work surface while maintaining the focused spot travel on a flat plane. The laser output is gated between marking strokes. This design offers the user the advantages of a computer generated marking image and utilization of the entire laser output for the highest marking power possible.
The mask or "stencil" marking system sacrifices image quality and versatility for significantly increased marking speed. The marking image is created by enlarging the laser beam, projecting it through a copper stencil of the desired image, and refocusing the beam on the target surface to "burn" the image into the material. A single pulse of the laser creates the entire image. If the alphanumeric characters must be altered part-to-part, (i.e., serialization, etc.), computer-controlled rotary stencil wheels index the characters. This technique is aesthetically limiting in that images exhibit a "stencil" appearance with breaks in the marking lines. Since the mask blocks a high percentage of the laser beam, marking power and resultant surface penetration is limited.
Laser and Imaging Combinations
Beam-steered Nd:YAG
The combination of the Nd:YAG (Neodymium:Yttrium Aluminum Garnet) laser and the beam-steered delivery optics marks the widest range of materials and provides the versatility of computer controlled image generation.
Nd:YAG lasers amplify light in the near-infrared at 1.06 mm. Metallic materials absorb a comparatively high percentage of the light in this region of the spectrum. In the pulsed mode, the Nd:YAG laser produces peak powers considerably higher than the normal continuous-wave output. A 90 watt CW Nd:YAG laser, pulsed at 1 kHz, will emit a train of pulses with peak powers of 110,000 watts. The Nd:YAG lasers ability to emulate an "optical capacitor" provides the power necessary to vaporize metallics and other materials. The high peak power will vaporize material up to 0.005 inches deep in a single pass or greater with multiple passes. The non-metallic materials normally associated with the far-infrared wavelength of the CO2 laser are usually highly reflective to the Nd:YAG. However, the high peak power of the Nd:YAG can often overcome the higher reflectivity. Some overlap does occur among many plastics that absorb both wavelengths equally well.
The beam-steered marker can duplicate virtually any vector graphic image including variable line widths and images as small as 0.010 inch or less. In addition, the computer can instantly change any graphic element or the entire marking program before a new part is positioned for marking.
The Nd:YAG laser offers a greater range of adjustable process variables to achieve a specific material modification but at a correspondingly higher purchase price than the CO2 laser.
Beam-steered CO2
The continuous-wave CO2 laser can also be combined with the beam-steered delivery system.
CO2 lasers emit a narrow bandwidth of light in the far infrared at 10.6 mm. This wavelength is most suitable for organic materials such as paper and other wood products, many plastics, removing thin layers of ink or paint from a substrate, and for marking ceramics. It does not produce high peak powers when pulsed.
Typically utilizing laser powers up to 50 watts, these systems combine the far infrared wavelength with the image control and flexibility of beam-steered image generation. Typical uses include serialization of ceramic and plastic products that require high-quality graphics such as company logos and/or significant amounts of additional alphanumeric text. The lower power CO2 marker does not provide the power to "engrave" substrates but, due to the comparative simplicity of design, can be purchased at a lower cost than the beam-steered Nd:YAG marker.
Mask CO2
Applications that require high speed but not high power and do not vary the marking image except for alphanumeric text (i.e., serialization, date code, etc.) utilize the mask CO2 marker. The CO2 laser is pulsed at rates of up to 1,200 pulses per minute. The high repetition rate provides marking of parts "on-the-fly" at high part-transfer speeds. Computer controlled masks can alter up to three lines of text at speeds of up to 720 parts per minute if the alphanumeric code must be changed.
Advantages and Disadvantages
Beam-steered Nd:YAG
The beam-steered Nd:YAG provides more marking power and far superior imaging than any other laser marker configuration. The available high peak power can mark or engrave a wide variety of materials including hardened metallics. Present computer technology produces highly intricate graphics with linewidths and accuracy's of less than 0.001 inch. Because “drawing” with the laser beam creates the image, the marking time is dependent on the amount of text and the complexity of any graphics. The Nd:YAG laser marker is the most costly of the three system configurations.
The beam-steered Nd:YAG marker frequently replaces acid and electro-etch systems, stamping and punching systems, and those other marking systems which permanently mark products by imprinting or engraving. It also replaces ink jet and other color printing systems. Typical applications include marking pistons, bearings, valves, gears, and a multitude of other components in the automotive industry; heart pacemakers, replacement hip joints, and surgical tools in the medical industry; computer chassis, disk drives, and integrated circuits in the electronics industry; tool holders, drill bits, and cutting tools in the tool industry; and writing pens, nameplates, and golf club grips.
Beam-steered CO2
The acquisition and operating costs of the beam-steered CO2 marker are lower than the Nd:YAG marker due to the relative simplicity of the laser. Image generation is equal to that of the other beam-steered system while speed and depth of penetration are considerable lower due to the lower power of the CO2 laser. Although not as popular as the beam-steered Nd:YAG and mask CO2 markers, the beam-steered CO2 system is frequently used for marking general plastics and plastic and ceramic connectors and packages within the electronics industry.
Mask CO2
Although the mask CO2 does not offer the imaging capabilities of the beam-steered design, it is far superior in speed. Because a single pulse of the laser creates the entire image, throughput is typically limited only by the pulse rate of the laser and the transfer speed of the parts handling system. While the part must be stationary while marking with the beam-steered design, parts are marked in motion with mask systems. Depth of penetration is less than the beam-steered CO2 marker since the laser output is spread over a large area with correspondingly low power density.
Masked CO2 markers most frequently compete with ink-jet marking. The mask CO2 laser is often the marker of choice for sequenced coding, batch coding, open or closed date coding, and real-time coding of paper or cardboard, ink or paint coatings, glass, plastics, coated metals, and ceramics.
While the beam-steered design provides superior imaging and material penetration and the mask design provides superior speed, either system provides a better combination of speed, permanence, and imaging flexibility than other marking techniques. Many users also benefit from the non-contact nature of laser marking and the elimination of additive materials such as inks or paints.
The development of a successful marking application requires careful consideration of the laser output characteristics, the design of the optical beam delivery and image generation system, the properties of the target material, and the aesthetic and physical properties of the desired mark. Industrial laser marking systems provide prospective users with several system designs from which to choose to match the optimum marking performance with the users unique requirements.
Article keywords: laser marking, nd yag, laser drilling, co2 laser, laser etching
Article Source: http://www.articles32.com
Richard Stevenson is the Sales Director for Control Micro Systems, Inc. a manufacturer of beam-steered laser marking systems. He has published and presented numerous technical papers and articles on laser marking in trade publications. For information on UID Marking, Laser Welding, Engraving, Cutting, Etching or Marking call 407-679-9716 or email sales@cmslaser.com
.: New Hardware Articles
1). Computer Recycling: What You Need To Know
Overall disposing of computers correctly by recycling parts and components could result in a better cleaner less toxic environment. Cleaner environment means less global warming, habitat destruction and deforestation. Also reducing the amount of raw materials needed in order to produce these machines.
2). How To Keep A Cleaner, Longer Running Computer
One of the more neglected aspects of owning a PC is following some simple preventative maintenance procedures. Preventative maintenance procedures are commonly recommended for most all mechanical and technological gadgets.
3). What is the WEEE Directive?
The Waste Electrical and Electronic Equipment (WEEE) 2006 directive concerns the responsible disposal of electrical and computer equipment by companies and individuals, and is now enshrined in European Law.
4). Edgeline Printer Technology Will Change Office Printing Forever
Imagine print speeds as fast as 70 pages per minute. Imagine color output as good as the best inkjet technology. Now combine that with the best operating costs available today. Sound too futuristic to be possible? Find out why this technology could be in your office by mid-year.
5). Ink Cartridges: How to Buy the Best Value Printer For Them
Printers, ink cartridges and other computer peripheral hardware are any everyday part of life at home and work today
6). HP Ink Cartridge Refill Kits Are Smart Buys
For those who need HP ink cartridge refill kits, the news is good. There are many companies that make these tools.
7). Find The Best Computer Printer Ink Price Ranges
However you can not find much difference in computer printer ink price ranges in the stores. Even you may not found the exact price to the same products in different stores. That is why the ultimate solution to get the exact price may in some cases you will get discount price.
.: Top Hardware Articles
1). Acer Aspire 3004WLCi - A Quick Review
I recently found myself in need of a new laptop. With a tight budget and moderate needs, I knew it wasn't going to be easy to find a product that would do what I wanted and still be in my price range.
As a Network Technician and a Web Designer, I needed a machine that would have enough storage to store all my software, projects for my clients, and still be able to handle an occasional temporary operating system backup from a client's machine.
2). IBM Computer Diagnostics: Error and Beep Codes
The following table includes some of the more common printed error codes that might be displayed when your vintage or non vintage IBM computer is performing the power-on self test (POST).
- record error codes that are displayed. If you need to call for help it will be best to be able to provide the error codes.
- if you get multiple error codes , always work to solve problems in the order in which the error codes are displayed.
3). Find your laptop drivers easily!
Many people, especially beginners, struggle in finding drivers for their laptops. In this article, I will illustrate two ways to help you find your laptop drivers quickly, and easily.
The first method we will consider is to visit a company's website, and attempt to find a 'Drivers' or 'downloads' link. If a similar link is not immediately apparent, look for a search box.
4). Canon Pixma inside out – the iP4200 Photo Printer
So you might have already heard about the new Canon Pixma iP4200 that’s doing the rounds in the computer hardware industry nowadays. Everybody is reviewing it, including us.
Canon has been keeping mum over the longest-lasting-photo-prints debate for sometime now. Possible explanations include the newly released Pixma iP4200, with built-in duplex printing; individual cartridges; two paper-input trays; easy operation; inexpensive; great-looking photos; and 100-year print life.
5). How To Properly Install A New Motherboard
The motherboard is the most expensive computer component so be sure to treat and handle it with great care.There are a few things you should do to ensure no motherboard damage occur as you prepare for the installation.
Be sure you have a clean,well lit,and level work place.Relax your mind and make this task both fun and educational.You will need such tools as a phillips screwdriver,maybe some needle nose pliers and the manual that came with the board.
6). Why do we defrag the Hard Disk?
What is Defragging?
Defragging is process done to a hard disk in order to improve performance and recover some lost disk space. Defragging is an essential part of a PC's upkeep as it keeps all the data on your hard disk in an easily readable order. If a hard disk is left without defragging, then over time the disk will begin to lose performance and also slowly reduce the available capacity to data.
7). USB Memory - Tips on Booting Your USB Device
The arrival of this miniature hard disk was a great timing just as computing is in need for memory drives that can solve the problem of the aging floppy disk.