.: Designing and Preparing the Vehicle for Wrapping
By:Justin
Category:Home / Business / Advertising
Knowing the vehicle
Knowing the shape and size of the vehicle and all its nuances is a critical part of the design process; therefore, taking measurements before you do any design work is a must. You really have to have a good handle on templates, templates are so key because positioning is critical. If you have to do a lot of reprints, then that could break your business. Experts also recommend an auto library that contains vector images of cars, trucks and buses and a digital camera with which to take pictures. The goal is to know every inch of the vehicle. If you don’t take time to do this up front, then you could end up with text over a door handle. Even though you are wrapping a 2003 Dodge Caravan, for example, measurements are still important because there are slight differences that could cause major problems during installation. You can get this library at the end of this article.
Designing for wraps
Designing for wraps is completely different than other types of design work, It’s like any new media, you have to learn the media and you have to learn what is going to capture the attention of the people. It’s more than just putting graphics on a car. Avoid using too much text or colours. Many people are using rainbows on cars and that causes the intended viewer to miss the message. In fact, making a bold statement is one of the biggest challenges in designing for wraps. You have to keep it simple. You need a strong message. You only have a few seconds to get the message across as the car passes by, It’s a branding media; it’s not a message media. You just show the brand for recognition more than to run a brochure.
Keeping it simple
One of the biggest mistakes with wrap designs is going overboard with flashy graphics or trying to put a one-dimensional design on a three-dimensional vehicle. Normally where your hood and your front bumper transition to the side of the car is challenging. You are basically laying down a flat design on the hood and a flat design on the side of the vehicles and if you have a wacky design, then they don’t transition well on either side of the hood and on either side of the trunk on the back. One key to success boils down to common sense: work closely with the client throughout the design process. In fact, you could even outsource the design work, the printing and the installation and basically act as a sales rep. If the customer wants to deal with you and the price is fine, then go for it.
Preparing the vehicle for installation
Once the design work is complete, the next step is preparing the vehicle for installation. Proper cleaning and preparation of the substrate prior to application is critical to the success of the wrap, because if the vehicle is not thoroughly cleaned immediately prior to application, then the result could be adhesion loss. You want to make sure to get all the dirt out of any contours and grooves, any dirt can effect how any of the film adheres to the substrate. Most vinyl manufacturers recommend cleaning the vehicle with a commercial detergent and water. If grease, oil, wax or any other grime is present, then the substrate must be scrubbed with a solvent and wiped with a soft, lint-free cloth before it dries. Isophoryl alcohol is strong enough to clean away any left over impurities that could hinder the adhesive, but not so strong that it will damage the paint. Still, experts recommend testing the cleaning solvent on an inconspicuous area of the application surface first to check for potential damage.
Allowing the vehicle to dry
Experts say a common mistake during the preparation process is not allowing the vehicle to dry fully. It can take up to 24 hours for a vehicle to dry completely, especially in humid or cold atmospheres. Emphasize on the importance of surface preparation, one common mistake that is easy to understand but often overlooked is having the vehicle at the proper temperature for installation. Sign shops in the north are at somewhat of a disadvantage because vinyl films are typically more susceptible to failure in cold environments. Even if the vehicle seems like it’s dry, if it’s cold and there’s moisture in the air, then it sticks to the surface of the vehicle and creates barriers to the performance of the film.
Considering paint and glass
If you are applying film to a newly painted surface, Avery recommends following all drying and curing instructions provided by the paint manufacturer prior to surface preparation and film application. Avery also recommends the use of high quality exterior grade paints and OEM systems. You also need to prepare the glass if you are going to apply perforated vinyl to these areas. Like the vehicle itself, the glass should be perfectly clean. Avery recommends removing any stickers, paint or over-spray using a single razor blade scraper. Then spray the glass with cleaning solution, squeegee it dry using a soft rubber window squeegee and wipe the edges using lint-free paper towels.
Once the vehicle is thoroughly cleaned and dried, then you can proceed with installing the wrap.
Article keywords: vehicle graphics, vinyl wraps, custom graphics, custom decals, vinyl wrapping, car wrapping, van wraps, truck wraps
Article Source: http://www.articles32.com
Justin Murray is Marketing Director of Pyramid Visuals Ltd. a leading company in vehicle wrapping, banners and large format digital printing
Address for free Vehicle Profiles Vehicle graphics
.: New Advertising Articles
1). How To Promote Your Business Using Advertising Balloon Signage
A hot air balloon has the ability to create a lot of excitement. It can immediately attract and hold a lasting impression on people. Millions of spectators annually attend the hundreds of balloon events nationwide. It is more than any other outdoor summer activity, and that includes baseball games.
2). Five Ways to Make Your Advertising Work Harder
One of the sharpest minds in the direct response marketing business is fond of advising potential advertisers that creativity is not a positive virtue for an advertising copywriter.
3). Tobacco Companies Promotional Methods
Tobacco companies go into verious promotional methods to advertise their products in the tightening atmoshere of legal bans and exposure restrictions.
4). A Deadly Mistake Made In Marketing
Of all the things people hate about marketing, the worst is when people feel deceived.
5). Every Long Journey Starts With One Step
Promote your website or business and reduce the cost of advertising
6). Digital Signage Market Poised to Skyrocket
Digital signage continues to strengthen as traditional media deals with declining use.
7). Advantages of Giant Advertising Balloons
Advertising on giant hot air balloons is fast becoming the best and most spectacular form of publicity available. A giant advertising balloon as a public relations tool, there can be no other choice that is as effective when organizing events and conventions.
.: Top Advertising Articles
1). Welcome to Desiclassifieds: Free Classifieds, Free Ads, Free advertisement
The modern world is in a continuous movement and people everywhere are looking for quick, safe means of accessing accurate information. Prompt information is vital for people who want to keep the pace with a constantly evolving society, and many people are turning to the Internet for help in their quest for knowledge.
The Internet is not only the best means to quickly access information, it also has the merit of bringing people all over the world together, allowing them to interact in a safe, exciting environment.
2). What Does Your Logo Color Say About Your Business?
And not only your logo, but also your website, your brochure, your business cards and any of your marketing materials for that matter.
Yes, colors do matter
They communicate feelings and emotions. They represent ideas and thoughts. So before you create a logo or any other piece of marketing make sure you select the right colors to communicate a personality that accurately represents you and your business.
3). 66 Ways To Promote Your product or Services
Some guru sells his program because he has 60 ways of marketing. One Dentist was asked about his marketing he said he had 100 ways and use them all. Well I came up with 66 so far. I will work on more sometime after tax season or you can email me with ones I might have missed.
The true is you can’t use them all. Some are too costly for many of us. Some won’t work.
4). Word Of Mouth Advertising - Steps To Create Awareness
Word of mouth advertising creates an awareness campaign where your business information travels from person to person, creating a world wind of awareness. For a new business start-up, word of mouth marketing is often the best and most effective advertising method.
Newspaper print and classified ads can get very expensive, and have lost much of their effectiveness with the popularity of the internet in the past decade.
5). Meaning of Catch Phrases in Ads For Homes
If you are buying or selling a home, the chances are good you struggle with the meaning of descriptive real estate terms. Here’s the first in a series of articles explaining them.
The Wise Seller
Be very truthful if you are a seller advertising your home. Mention your home’s best features, but do not exaggerate. If someone comes to look at your home and feels disappointed, they are not apt to buy.
6). A Tale of Three Duplicities
Last issue you may recall reading “A Tale of Two Duplicities.” Now you can enjoy the third and final saga in this trilogy of Internet shenanigans!
This had been a notable week in terms of the deluge of news articles regarding Internet fraud. Perhaps the summer heat and the forecast of temperatures rising into the 100s have an overall noxious effect on people’s behavior, compelling them to acquire the demeanor of cyber-villains in the same way that a full moon has been known to induce aggressiveness.
7). Silicone Bracelets 101
Silicone Bracelets 101
Debossed, & Embossed, & Printed – Oh My!
There is often a lot of confusion regarding the various styles of custom silicone wristbands. Many people confuse embossed bracelets with debossed bracelets (even some silicone bracelet suppliers!) and are uncomfortable with printed wristbands. Throw in the option of laser-engraved wristbands and they throw up their arms in surrender.