.: How To Choose A Good Tuner From The Bad
Category:Home / Computers / Hardware
Choosing a tuner for your system is of little difference from choosing other components. When auditioning other components, people are primarily concerned with their sound quality, not their technical performance.
For example, if a preamplifier under audition sounds good, you do not need to worry much about its technical performance. Because .if it sounds good, then it is working well.
Tuners, on the other hand, exhibit great variability in their technical performance. It will not only concern the tuner’s sound; tonal balance, sound staging, portrayal of timbre, etc., but also basic characteristics such as the ability to pick up weak or distant stations, reject adjacent stations, provide a noise-free audio signal, and stay tuned to a station without drifting.
A tuner’s performance in these areas can be accurately characterized by measurement; this makes tuner specifications much more significant than those of other audio components.
There is a direct correlation between a tuner’s specifications and its sonic performance. You still have to listen to the tuner before you buy, but you can often separate poor performing models from better units by looking at the specification sheets.
Unlike most audio products, the best high-end tuners have more features, front-panel controls, and displays than the lower-end products.
The price range for a good tuner from a mass-market manufacturer is between $400 and $1000. Some of the higher-end models from mass-market companies offer excellent performance.
The price range from $750 to $1200 is very competitive, with many superb units to choose from. The very best tuners cost as much as $12,000.
The differences between mediocre and excellent tuners.
Good tuners are characterized by their sensitivity or the ability to pull in weak stations. The greater its sensitivity, the better it can pick up weak or distant stations.
This aspect is more important in suburban or rural areas that are far from radio transmitters.
On the other hand, a tuner characteristic of greater importance to the city dweller is adjacent-channel selectivity or the ability to pick up one station without interference from the station next to it on the dial.
This specification defines a tuner’s ability to reject a strong station two channels away from the desired channel. When stations are packed closely together, as they are in cities, adjacent-channel and alternate-channel selectivity are more important than sensitivity.
Equally important to all listeners is the tuner’s signal-to-noise ratio, a measure of the difference in dB between background noise and the maximum signal strength. A tuner with a poor signal-to-noise ratio will overlay the music with an annoying background hiss.
A poor tuner will have trouble receiving weak stations, may lack the ability to select one station when that station is adjacent to another station, have high background noise, and be overloaded by nearby FM transmitters or other radio signal sources.
Many tuners have a high-blend circuit that automatically switches the signal to mono when the signal strength falls below a certain level.
The difference between high-blend and the mono/stereo switch just described is that the high-blend circuit puts only the treble into mono, leaving the rest of the spectrum in stereo. This gets rid of most of the noise, but maintains stereo separation through most of the midrange and bass.
Lastly, all good tuners have a 75-ohm coaxial antenna input as well as the more commonly used 300-ohm flat-lead input. The coaxial input should be used for best signal transmission between the antenna and tuner.
Article keywords: tuners
Article Source: http://www.articles32.com
Robert Thatcher is a freelance publisher based in Cupertino, California. He publishes articles and reports in various ezines and provides tuner resources on www.abouttuners.info.
.: New Hardware Articles
1). Computer Recycling: What You Need To Know
Overall disposing of computers correctly by recycling parts and components could result in a better cleaner less toxic environment. Cleaner environment means less global warming, habitat destruction and deforestation. Also reducing the amount of raw materials needed in order to produce these machines.
2). How To Keep A Cleaner, Longer Running Computer
One of the more neglected aspects of owning a PC is following some simple preventative maintenance procedures. Preventative maintenance procedures are commonly recommended for most all mechanical and technological gadgets.
3). What is the WEEE Directive?
The Waste Electrical and Electronic Equipment (WEEE) 2006 directive concerns the responsible disposal of electrical and computer equipment by companies and individuals, and is now enshrined in European Law.
4). Edgeline Printer Technology Will Change Office Printing Forever
Imagine print speeds as fast as 70 pages per minute. Imagine color output as good as the best inkjet technology. Now combine that with the best operating costs available today. Sound too futuristic to be possible? Find out why this technology could be in your office by mid-year.
5). Ink Cartridges: How to Buy the Best Value Printer For Them
Printers, ink cartridges and other computer peripheral hardware are any everyday part of life at home and work today
6). HP Ink Cartridge Refill Kits Are Smart Buys
For those who need HP ink cartridge refill kits, the news is good. There are many companies that make these tools.
7). Find The Best Computer Printer Ink Price Ranges
However you can not find much difference in computer printer ink price ranges in the stores. Even you may not found the exact price to the same products in different stores. That is why the ultimate solution to get the exact price may in some cases you will get discount price.
.: Top Hardware Articles
1). Acer Aspire 3004WLCi - A Quick Review
I recently found myself in need of a new laptop. With a tight budget and moderate needs, I knew it wasn't going to be easy to find a product that would do what I wanted and still be in my price range.
As a Network Technician and a Web Designer, I needed a machine that would have enough storage to store all my software, projects for my clients, and still be able to handle an occasional temporary operating system backup from a client's machine.
2). IBM Computer Diagnostics: Error and Beep Codes
The following table includes some of the more common printed error codes that might be displayed when your vintage or non vintage IBM computer is performing the power-on self test (POST).
- record error codes that are displayed. If you need to call for help it will be best to be able to provide the error codes.
- if you get multiple error codes , always work to solve problems in the order in which the error codes are displayed.
3). Find your laptop drivers easily!
Many people, especially beginners, struggle in finding drivers for their laptops. In this article, I will illustrate two ways to help you find your laptop drivers quickly, and easily.
The first method we will consider is to visit a company's website, and attempt to find a 'Drivers' or 'downloads' link. If a similar link is not immediately apparent, look for a search box.
4). Canon Pixma inside out – the iP4200 Photo Printer
So you might have already heard about the new Canon Pixma iP4200 that’s doing the rounds in the computer hardware industry nowadays. Everybody is reviewing it, including us.
Canon has been keeping mum over the longest-lasting-photo-prints debate for sometime now. Possible explanations include the newly released Pixma iP4200, with built-in duplex printing; individual cartridges; two paper-input trays; easy operation; inexpensive; great-looking photos; and 100-year print life.
5). How To Properly Install A New Motherboard
The motherboard is the most expensive computer component so be sure to treat and handle it with great care.There are a few things you should do to ensure no motherboard damage occur as you prepare for the installation.
Be sure you have a clean,well lit,and level work place.Relax your mind and make this task both fun and educational.You will need such tools as a phillips screwdriver,maybe some needle nose pliers and the manual that came with the board.
6). Why do we defrag the Hard Disk?
What is Defragging?
Defragging is process done to a hard disk in order to improve performance and recover some lost disk space. Defragging is an essential part of a PC's upkeep as it keeps all the data on your hard disk in an easily readable order. If a hard disk is left without defragging, then over time the disk will begin to lose performance and also slowly reduce the available capacity to data.
7). USB Memory - Tips on Booting Your USB Device
The arrival of this miniature hard disk was a great timing just as computing is in need for memory drives that can solve the problem of the aging floppy disk.