.: Six Largest Mistakes Made when Hiring a Cabling Contractor
Category:Home / Computers / Networks
Cabling of data and voice systems is often ignored by many companies until the last minute just before relocation or new building takes place. Many information systems professionals view it as a low priority or something that just takes away from their budget for real network components such as servers or software. However having a state of the art easy to manage cabling system is just as important as good reliable servers on a network. Cabling is the backbone of any computer network; it ties all the components of the network together therefore it should receive as much careful consideration as any other network component.
Mistake number one – Blindly choosing the lowest bidder
This is the most common mistake made when installing voice and data network cabling. Often the lowest bidder is the contractor who is the smallest, has the least experience or the one that made a mistake on their bid. Prior to making this decision you should know your contractor. Find out how long they have been in business, visit some of the large installations they have done and by all means go visit their offices and warehouse. A site visit to their office will tell you most of what you need to know about an organization. Make sure your contractor has completed jobs of similar scope and size.
Mistake number two – Choosing the manufactures product that will be installed
Many companies have tried to standardize on a particular manufacture of cabling system. Some of the larger manufactures are Belden, Comscope, Ortronics, AMP and Leviton. You can’t go wrong with any of these big names. However IT managers and corporate executives get hung up on trying to standardize because they believe it will make things easier for the IT staff. The reality of the situation is that if you choose any of the larger names the only components that might not be interchangeable are the faceplates. Of course there are performance criteria as well and they all claim to be the best. Do your own research and choose a manufacture that you feel has a strong company that will be there to stand behind their product should you even need to make a warranty claim
Mistake number three – Paying too much for the latest cabling technologies
The fact is that today’s network components and network components of the future cannot exceed the specifications of Cat 5E and Cat 6 cabling components. Combine this with the fact that the average company moves every 3 to 4 years. You will find it hard to benefit from future proofing a building you don’t occupy. Look at you current infrastructure, what equipment or applications do you plan to add or upgrade? Is Gigabit or 10 Gigabit Ethernet an option for you in the near future?
Mistake number four – Not using universal wiring
The EIA/TIA and BICSI both recommend a universal wiring platform for your Communications Infrastructure. In the old days the average install would consist of a single voice grade cable for the phone system and a single data grade cable (Cat 3, Cat5, Cat5E or Cat 6) for their computers. This of course dedicates the usability of these cables to one system type. This is further exacerbated by the termination method used. Voice cables were traditionally terminated on 66 style blocks (66m1-50), which are not user friendly and require a special tool and cross connect wire to make changes. Telephony companies have made a killing for years just performing MAC work (Moves, Adds and Changes) because a customer was unable or unwilling to brave the telephone closet and perform the MAC work themselves.
The practice of using a true universal wiring platform is now the standard for all reputable cabling contractors. A Universal Wiring Platform is made up of all data grade components that are downward compatible for all voice applications. A common installation would consist of 3 Category 5E or Category 6 cables all terminated on a 110 type Patch Panel. At the wall plate all cable would be terminated on the matching grade of 8 position modular jack (incorrectly know as an RJ-45). This design not only allows for maximum flexibility were the customer could have 3 computers or 3 phones or 2 computer and 1 phone or any configuration that works for their application. The point is that now the customer is in complete control of their cabling infrastructure and does not need to pay a contractor to come out every time they move an office. In the long run this will also save you money on the overall cabling system as it will shift and flex to meet your needs without having to bring in your cabling contractor. Remember, having the contractor in after construction has completed will involve them pulling out ceiling tiles and standing on desks while you are trying to do business. The elimination of the disruption alone makes it worth while.
Mistake number five – No CAD pre installation and post installation CAD drawings.
Most customers really have no idea what their cabling platform will look like when they sign the paperwork. They rely on their contractor to “just do the right thing”. Do not make this mistake, if you don’t understand how your infrastructure will work or what it should look like, don’t sign. Your contractor should have the ability to take your building blue print and overlay his cabling plan on top of your electrical plans. This will give you a visual representation of what you are paying for and allow you to ask questions. Likewise, after the job is complete you should receive what is called an “As Built Drawing” showing all of your communications outlets with a standards based numbering system. Some contractor will even provide a scale elevation plan showing were your patch panels are and how much room you have left in each rack for growth and or other equipment. This should be provided to you both hard copy and in AutoCAD format for your architect to incorporate into your final building As Builts.
Mistake number six – Not getting a design before the job starts.
This seems to be all over the board, some people have no design plan what so ever. Some will pay $10,000 for an engineering firm to write a specification were they charge by the pound for the spec. Don’t be fooled that a large spec is a good spec. Often a specification filed with time consuming exercises for the bidding contractor and unnecessary pricing breakouts will only prevent good contractors from bidding on your project. What you want is a spec that clearly defines your realistic requirements, requires basic qualification with references and does it as quickly and simply as possible. Do not try to write a spec that will cover every contingency, you will drive your contractor away and you will only confuse the process more. Once you have selected your contractor based on an apple s to apple comparison, you can always and should always sit down to discuss the project and other options that they recommend. One more thing, always, always have the contractor provide you with a parts list with quantities, not individual prices, just quantities. This will help you weed out the contractors that did their homework when you start to compare their list of parts.
Mistake number six – No cable management
All cabling systems will look organized before they are used, that’s easy. Show me that cabling system after 6 months and I will tell you if the proper wire management was used. “Used” being the key word here. Remember, you can have the best wiring management in the world, if you don’t strictly enforce its use with your IT Staff, you will have a mess. That said, your contractor must provide you with a good design. My recommendation is, listen to your contractor, they know more than you do about this. Then, go visit some of the sites that are done the way they recommend. See how they look after being used a few months. Ask the customer how easy it is to keep organized. Don’t underestimate the value of this step. If your patch panels are a mess and you can’t effect changes in a rapid and orderly fashion then you would have been better off paying your contractor to do the MAC work for you.
Article keywords: cabling san diego, la ethernet wiring, los angeles cabling, los angeles cabling contractor, los angeles computer wiring, network cabling san diego, orange county cabling, san diego cabling companies
Article Source: http://www.articles32.com
American Internet Services (AIS) offers quality San Diego cabling & Los Angeles cabling services.We have a professional staff that will be able to help with all your Los Angeles or San Diego data cabling needs. www.data-cabling.acccom.com
.: New Networks Articles
1). How to Build a Cat 5 Cable
STEP 1 - Stripping
Start by pulling out about 12 feet of bulk network cable to making the process a little easier. Carefully remove the outer jacket of the cable exposing about 1 1/4" of the twisted pairs. Be careful when stripping the jacket as to not nick or cut the internal wiring. After removing the outer case you will notice 8 wires twisted in pairs and a rip cord (white thread).
2). Network Security – The Real Vulnerabilities
Scenario: You work in a corporate environment in which you are, at least partially, responsible for network security. You have implemented a firewall, virus and spyware protection, and your computers are all up to date with patches and security fixes. You sit there and think about the lovely job you have done to make sure that you will not be hacked.
3). Small Business Networking: Suggesting Dedicated Servers to Clients
PC-based servers and LANs may be relatively mature technologies. However, small businesses need your firm’s expertise, more than ever. For these businesses, you'll need to select, configure, customize, secure and maintain the right small business networking tools for their unique needs.
Real Small Business Networking Solutions Begin with Real Servers
How.
4). Network Cabling: Available Options
As their IT consultant, your small business prospects and clients will need you to explain the different network cabling options available to them.
Traditional Wired Ethernet (Category 5)
Until very recently, Category 5 data cabling was the de facto standard for both enterprise and small business LANs. Today, you’ll find some enhancements available to Category 5 cabling, as well as booming interest in wireless Ethernet solutions.
5). Recognize And Understand Home Networking Components
If you have not decided already,you will soon want to network your two or more computers in your home. You want to be armed to the teach with knowledge of just what it takes to connect your computers to one another.
You first should decide which network is best your you. If your computers are in the same room,the Wireless network should not be considered.
6). The Simplest Way to Get Online Passive Income
Based on my research, this seems to be the basic principle that website owners have been following to get passive income online:
* Get many people to come to your website * Get them to click on your Adsense links
Sounds simple enough. Get people into your website from Google search, then link out to an Adsense Ad. Search In – Adsense Out.
Practically applying it to get sufficient commendable income, however, can be quite a challenge.
7). What is search engine gateway?
Navino launched its search engine gateway service recently. For most of the Internet surfers, search engine gateway is a pretty new concept compared with meta search engine or multi search engine. Put it in simple, it is a web service, which can let you search the best information from the best content providers in one website.
When we try to find information everyday, most of us might go to Google.
.: Top Networks Articles
1). Computer Networking Fundamentals
Computer network is an integral part of our daily lives, with the most important reason being that of communication.
2). Router - Denial Of Service Attacks
Routers are not perfect. For that matter, nothing is. So if somebody wants to give a router more than it can handle there is a way to do this. We're going to take a look at what are called denial of service attacks.
A router can only handle so much information coming into it at one time. Every machine has its limits and routers are no exceptions. Well, when the nasty trend of denial of service attacks started early this century, routers were unprepared for them.
3). Ethernet - explained
Do you use Ethernet? You might think that you don’t, but don’t be so sure. Ethernet is everywhere – if you use a networked computer, whether it’s at home or in your office, you’re using Ethernet.
Ethernet is two things: a kind of cable for connecting computers together, and the method of communication that the computers use over the cables. Essentially, it is the glue that holds LANs (local area networks) together.
4). Building a Cat 5 Cable
This will show you step by step how to build an ethernet, Cat 5, or Cat 6 Cable.
5). Finding Your MAC Address On Wired And Wireless Network Cards
The Answer To The Media Access Control Question
----------------------------
Over the past few weeks I have received quite a few e-mails about Ethernet cards, both wired and wireless, and more specifically, about Media Access Control (MAC) addresses. I think the main reason I’ve received so many questions about Ethernet cards and MAC addresses is people trying to secure their home wireless networks and their desire to use MAC address filtering.
6). There’s no mystery in the IP address!
The Computer is a very complicated device we use for our every day comfort and the importance of some of its numerical aspects is sometimes neglected. For example: a different number is given to each computer when its user goes online or when it is part of a network. This number is the IP address and knowing about it is like knowing where you live…
What’s my IP and what do its numbers stand for?
IP stands for Internet Protocol and the address is formed from 4 numbers separated by periods.
7). Recognize And Understand Home Networking Components
If you have not decided already,you will soon want to network your two or more computers in your home. You want to be armed to the teach with knowledge of just what it takes to connect your computers to one another.
You first should decide which network is best your you. If your computers are in the same room,the Wireless network should not be considered.