.: Torque Converter Operation
Category:Home / Cars and Trucks
The torque converter is one of the least understood components in an automatic transmission equipped vehicle. I will attempt to explain what it does and how it does it.
The torque converter has a few different functions.
We first need to understand that there is no direct link between the crankshaft and the transmission input shaft (except in the case of a lock up style converter, but we'll talk about that later). This means that the first function of the converter is to connect the crankshaft and the input shaft so the engine can move the vehicle; this is accomplished through the utilization of a fluidic coupling effect.
The torque converter also replaces the clutch that is required in a manual transmission; this is how an automatic transmission vehicle can come to a stop while still being in gear without stalling the engine.
The torque converter also acts as a torque multiplier, or extra gear ratio, to help the car get moving from a stop. In modern day converters this theoretical ratio is anywhere between 2:1 and 3:1.
Torque converters consist of 4 major components that we need to concern ourselves with for the purpose of explanation.
The first component, which is the driving member, is called the impeller or "pump". It is connected directly to the inside of the converter housing and because the converter is bolted to the flexplate, it is turning anytime that the engine rotates.
The next component, which is the output or driven member, is called the turbine. The transmission's input shaft is splined to it. The turbine is not physically connected to the to the converter housing and can rotate completely independently of it.
The third component is the stator assembly; its function is to redirect the flow of fluid between the impeller and the turbine, which gives the torque multiplication effect from a standstill.
The final component is the lock up clutch. At highway speeds this clutch can be applied and will provide a direct mechanical link between the crankshaft and input shaft, which will result in 100% efficiency between the engine and transmission. The application of this clutch is usually controlled by the vehicle's computer activating a solenoid in the transmission.
Here's how it all works. For the sake of simplicity, I will use the common analogy of two fans which represent the impeller and the turbine. Let's say that we have two fans facing each other and we turn only one of them on- the other fan will soon begin to move.
The first fan, which is powered, can be thought of as the impeller that is connected to the converter housing. The second fan- the "driven" fan can be likened to the turbine, which has the input shaft splined to it. If you were to hold the non-powered fan (the turbine) the powered one (the impeller) would still be able to move- this explains how you can pull to a stop without the engine stalling.
Now imagine a third component placed in between the two, which would serve to alter the airflow and cause the powered fan to be able to drive the non-powered fan with a reduction of speed- but also with an increase of force (torque). This is essentially what the stator does.
At a certain point (usually around 30-40 mph), the same speed can be reached between impeller and the turbine (our two fans). The stator, which is attached to a one way clutch, will now begin to turn in conjunction with the other two components and around 90% efficiency between the crank and the input shaft can be achieved.
The remaining 10% slippage between the engine and transmission can be eliminated by connecting the input shaft to the crankshaft through the application of the lock up clutch that was mentioned before. This will tend to lug the engine, so the computer will only command this in higher gears and at highway speeds when there is very little engine load present. The main function of this clutch is to increase fuel efficiency and reduce the amount of heat that is generated by the torque converter.
Another term that may be unfamiliar is that of a "high stall" torque converter. A high stall converter differs from a stock converter in the sense that the rpm is raised at which the internal converter components- the impeller, the stator and the turbine start to turn together, and hence, stop the torque multiplication phase and begin the coupling phase. The point at which engine rpm will stop climbing with the drive wheels held stationary and the throttle fully opened is referred to as "stall speed".
The idea behind a higher stall torque converter is to allow the engine to rev more freely up to the point where the powerband begins, and therefore, enable the vehicle to accelerate from a stop under more power.
This becomes increasingly important when an engine is modified. Engine modifications such as ported heads, bigger cams, bigger turbos (in some cases), bigger intakes, etc. tend to raise the point where the powerband begins. For best performance, the stall speed needs to be raised accordingly to work optimally in conjunction with the given vehicle alterations.
In simple terms, for best performance, the stall speed should be raised at least to the point where the torque curve is heading towards its peak. As a rule of thumb, the stall speed should be set to match the rpm at which the engine is making at least 80% of its peak torque for a street driven vehicle.
As you can imagine, a vehicle that can accelerate from a stop with 80% of its peak torque will easily outperform an otherwise identical vehicle that can only launch at 50% of its available torque.
For a performance or "high stall" torque converter to produce maximum gains, it needs to be configured to the specific vehicle in which it will be installed.
Factors such as engine torque and the rpm at which it is greatest, differential gear ratio, vehicle weight, camshaft design, compression ratio, type of induction- forced or naturally aspirated, and a host of other variables all need to be taken into consideration. Be aware that the "off the shelf" type performance torque converters sold by some manufacturers are very unlikely to be optimized for all vehicles and their unique requirements.
Article keywords: transmission, transmissions, performance, torque converter, high stall
Article Source: http://www.articles32.com
John Lombardo is owner of IPT Performance Transmissions- www.importperformancetrans.com and has been in the automotive transmission repair and high performance industries for over 20 years.
.: New Cars and Trucks Articles
1). How The ATV Snow Plow Can Help
Looking into a snow plow for the winter season? Maybe the ATV snow plow is just the right addition to your family.
2). 2007 Lamborghini Murcielago Review
The Murcielago is considered, even by purists, the greatest Lambo ever produced. Learn more about this Italian beast here.
3). Be A Defensive Driver Not A Drunk Driver
These are some key basic tips to becoming a better driver and remember these tips can save you life and save you money...
4). Important Car Air Conditioner Parts
The air conditioner has become a necessity to keep away the scorching heat. Even in case of traveling you need conditioned and healthy air to drive safely and comfortably. With an onset of automobile air conditioner in 1940, things have gone an automatic change.
5). Finding The Perfect Car For You
Your car may be the second largest purchase you make in your lifetime.
6). History Of Hybrid Car
There were quite a few people interested in hybrid technology, and some were long before the application for this particular patent was submitted. The history of hybrid car products on the highway was just emerging to the forefront of American minds during this time.
7). All The Amazing Secrets Of Go Karts
This article goes over everything about go karts in brief. History, equipment, racing, and more. Learn everything you want to about go karts here.
.: Top Cars and Trucks Articles
1). 2008 Chery QQ: Sneak Peak!
China’s Chery Automotive Group is getting set to import as many as five vehicles into the US starting in the summer of 2007. These 2008 models are reportedly going to be cheaper than competing models in their respective classes, undercutting some models by as much as $10,000 per car. I have been doing a little investigating and have learned more about the Chery QQ, the three door compact that will retail for just $6995.
2). The Best in Headlight Repair, Cleaning, and Restoration
Want to know how to fix and repair those expensive plastic headlights? Read on.
3). Customize Your Car With Wheels And Rims
Post 1900’s, the aftermarket for cars’ wheels and rims has become huge. Everyone wants to customize their car with the latest and trendiest set of wheels. You car can look more trendy within minutes of installing the latest set of custom wheels and rims. But selecting the right one is extremely important.
Types of custom wheels and rims
There are many different types of wheels and rims that you can find in the market.
4). How To Install Car Speakers
All cars have their own unique type of car speaker installation issues although installing speakers is a relatively simple process. Most speaker installations can be finished in about an hour or less. The intricacy of the installation will vary depending on the vehicle. And again, depending on the vehicle, speakers may be installed in the dash, doors, or rear deck.
5). Jaguar X Type: The Classic Luxury Sports Car
Built on a modified version of the Ford CD 132 platform, the Jaguar X Type is considered to be just another version of the Ford Mondeo. Take away the badge and the name from the Ford Mondeo and put in Jaguar badges, you would be getting the the Jaguar X Type. In fact the platform which it was built on was just a modified version of the Ford CDW 27 platform which is what the Ford Mondeo uses.
6). The Ultimate Nissan Skyline NISMO Z-TUNE
With the 34 GTR no longer in production Nismo decided to attempt building what they believed to be the ultimate Nissan Skyline GTR. Utilizing many years experience within different racing scenes it could be argued that Nismo should have the ability to do exactly that. This vehicle was to benefit from the many years of success Nismo had within motor racing.
7). Is It Necessary to Change My Oil at 3,000 Miles?
When Do I change my Oil?
Motor oil technology has gradually progressed since the days of the earliest automobiles. In those days, standard motor oil drain intervals were between 500 and 1000 miles, and motorists had to switch viscosity grades with the changing of the seasons. The development of oil filtration and additive technology in the 1930s allowed.