.: Washer Woes: Part 2 - How To Replace A Water-inlet Valve
Category:Home / Home / Home Improvement
Getting your clothes clean is all about water temperature and choice of detergent. If you have trouble regulating your washer's water temperature, your water inlet valve may be at fault.
This article follows up on the first article: Washer Woes: Part One – Water Temperature. If you’ve already read Part One and are still having problems regulating your washer's water temperature, read on to learn how to examine, test, and replace your water inlet valve.
Water enters the water inlet valve through two hoses that originate from the hot and cold water taps in your wall. Solenoids inside the water inlet valve respond to the temperature selector switch and create the selected water temperature. The mixed hot and cold water exits the water inlet valve through a common hose, filling your washer with the correct temperature of water.
Never attempt any repairs or maintenance on your washer without making sure the power to your washer is disconnected – you could be seriously injured if the power isn't disconnected.
The water inlet valve is located at the back of your washer (inside the cabinet). Before examining the water inlet valve, check the water flow. Shut off the water taps (at the wall) and disconnect the hoses from the back of the washer. Place the disconnected end of each hose in an empty bucket and turn on the water. Now check the flow of water and to make sure the hoses aren't blocked.
If the water flow appears to be correct, remove and examine the water inlet valve. The valve is held in place by two screws. Remove the screws and then disconnect the valve’s washer fill hose by loosening the clamp that holds the hose in place on the valve.
Now that the valve is removed, use a small, flat-head screwdriver to pop out the valve’s inlet screens. Carefully inspect and clean any debris from the screens. Be careful not to damage the screens - they cannot be replaced. If the screens are free of debris, the next step is to test the valve.
To test the water inlet valve, locate the wires attached to the terminals on each solenoid. Label the wires prior to removal so you can remember how to reconnect them. The wires are secured in place by metal slip-on connectors. When disconnecting the wires, use needle nose pliers to remove the connector from the terminal. Pull the connector, not the wire. If the terminals and connectors are rusty or corroded, replace the valve.
If the connections are fine, test your water inlet valve for continuity. You can do this with a multitester. Set your multitester to the ohms resistance scale X1.
Each solenoid has two terminals. Test one solenoid at a time by taking each of your meter's probes and touching one to each terminal. Readings can be different for each brand or model, but if you get a result of infinity, then the solenoid is damaged and the valve should be replaced.
To replace the old valve with a new one, connect the fill hose to the new valve and secure it in place with the screws. Attach the wires to the solenoid terminals, and the water hot and cold water hoses to the valve openings. When everything is secured, turn on the water. Check the water inlet valve and hoses for leaks before turning on your washing machine and running it through a cycle.
Sometimes there is no way of knowing what is wrong with your water inlet valve and replacing it may be the only solution. If you find this repair difficult to do, or if you don't have an ohmmeter or a multimeter, contact a service technician.
Article keywords: washer, temperature, clean, cold, warm, hot, broke, switch, valve, washing machine, dirty, solenoid, hose, fill, tap, water, inlet
Article Source: http://www.articles32.com
Tyler Anderson is a writer for Total Appliance Parts: Helping you repair your washer and other major appliances. Learn how to repair your own appliance and find parts for your washer, dryer, refrigerator and more at EasyApplianceParts.com.
.: New Home Improvement Articles
1). Wishing for Practical, Affordable Solar Power
The promise of affordable solar power has been delayed for decades. Will it arrive soon?
2). Build Your Own Residential Sauna - The Top 3 Considerations
Saunas are a fantastic way to relax and improve your health. Find out what you need to know before building a home sauna.
3). Do It Yourself Carpentry Is Here To Stay
Ever wonder why do it yourself carpentry never fades? Understand what do it yourself carpentry is for you.
4). Has Your Kitchen Sink Sunk?
A new kitchen sink refreshes the look of a kitchen.
5). Log Cabin House Plans - 5 Tips for Creating Your Log Cabin Floor Plans
Log cabin house plans will be used to build a rustic log cabin made of wood logs or log-like materials. Here are five tips for having those log cabin floor plans that will provide you with that dream log cabin home.
6). The Value In Home Improvement
You can learn more than one thing from undertaking a home improvement project.
7). Getting The Right Mattress Is Important For Your Health
If you have difficulties falling or staying asleep it could be due to the fact that your mattress is not comfortable enough or is not providing the right support in order to relax your body and mind into sleeping. Read this article to find out more.
.: Top Home Improvement Articles
1). Installing Ceramic Tile in a Shower
Installing ceramic tile in a shower starts with a proper foundation. The foundation consists of WonderBoard or Durock cement board on the walls and a Shower Pan Membrane Liner in the base of the shower, if the shower floor is to be tiled too.
WonderBoard or Durock cement board, also known as backerboard, are resistant to water and are ideal materials for applying ceramic tiles to high-moisture areas.
2). Building a Custom Ceramic Tile Shower starts with a Shower Pan Membrane Liner
Installing a custom ceramic tile shower in your home is something a do it yourself homeowner can do with a little upfront knowledge. The most important aspect of a successful custom ceramic tile shower installation is properly installing a shower pan membrane liner. The shower pan membrane liner is used to ensure a leak-proof shower.
Shower pan membrane liners are used to funnel any water that seeps through the floor or wall grout to the shower drain below.
3). Dupont Laminate Flooring – Get All The Information That You Need Right Here
Dupont laminate flooring is exclusively available at Home Depot. Here you will find one of the largest selections of all kinds of Dupont flooring, including the Real Touch Elite brand of laminate flooring. One of the most attractive features of this flooring is that you can install it on just about any type of surface. This means you don’t have to go through the extra work of tearing up the existing floor and laying down a special one suited just for Dupont laminate flooring.
4). Basement Finishing Ideas For DIY Enthusiasts
Basements can be a major selling point when it comes to real estate. Many people like having a finished basement for many different reasons. For those with a little DIY knowledge the basement can easily be turned into the best spot in the house.
5). How to Hang a Picture Properly
Hanging a picture may seem like the simplest of all home improvement projects. While it is quite easy, there are factors like wall type and object weight that you need to consider before hammering away. If you’re a beginner or if you’ve hung pictures before but always done some in a hit or miss kind of manner, these tips will come in useful.
6). Harmonics Laminate Flooring – Easy To Install And Keep Clean
Harmonics laminate flooring is a great choice to make for your flooring needs when you are building or remodelling a home. Many people today are taking the carpets off their floors and opting for the engineered hardwood of laminate flooring. You get the same elegant look of solid wood at a fraction of the cost. Even though you can buy glueless laminate flooring, experts with Harmonics laminate flooring recommend that you glue it to the subfloor anyway.
7). 10 Tips For A Window Coverings Makeover
You cannot stand it. The same old dreary windows that do little to add life to your home. It is time for a change. But, where do you start? How do you keep from making an expensive or embarrassing mistake? In fact, how can you know what you really want?
1.Start with one room at a time.
There may be the temptation, especially when moving into a new home, to decorate all of the rooms at once.