.: Metric Top Related Articles
1). Cisco CCNA Certification Exam Tutorial: Variance And Unequal Cost Load Balancing
To pass the CCNA exam, you've got to know how to work with IGRP and EIGRP unequal-cost load balancing. You may not see much IGRP in production networks anymore, but you'll see a lot of EIGRP, and part of fine-tuning your EIGRP network is making sure that all paths are in use while allowing for varying bandwidth rates.
Using the variance command is the easy part - it's getting the metric that's the hard part with IGRP.
Article tags: ccna, exam, pass, free, igrp, eigrp, load, balancing, equal, unequal, variance, metric, debug, ip, transactions, routing, switching, bryant, advantage, 12933
2). Cisco CCNP / BSCI Certification: Route Redistribution And The Seed Metric
In the first part of this free CCNP / BSCI tutorial, we looked at how leaving one simple word out of our route redistribution configuration - "subnets" - resulted in an incomplete routing table when redistributing routes from RIP to OSPF. (If you missed that part of the tutorial, visit my website's "Free Tutorials" section.) Today, we'll look at redistributing OSPF routes into RIP and identify another common redistribution error.
Article tags: ccnp, bsci, exam, route, redistribution, ospf, rip, seed, metric, routing, table, subnet
3). Cisco CCNA / CCNP Certification Exam Tutorial: Troubleshooting EIGRP
Part of earning your CCNA and CCNP - especially passing the difficult CIT exam - is becoming a master network troubleshooter. Today, we'll take a look at troubleshooting EIGRP and spotting common errors.
Most adjacency issues are easily resolved - mistyped IP address, bad wildcard mask in the neighbor statement, mistyped EIGRP AS number, and so forth.
Article tags: ccna, ccnp, cisco, certification, exam, free, eigrp, troubleshooting, metric, weights, router, ccie
4). Cisco CCNP / BSCI Certification: The BGP Attribute “MED”
When you're preparing to pass the BSCI exam and earn your CCNP certification, one of the biggest challenges is learning BGP. BGP is totally different from any protocol you learned to earn your CCNA certification, and one of the differences is that BGP uses path attributes to favor one path over another when multiple paths to or from a destination exist.
Article tags: ccnp, certification, bsci, exam, pass, bgp, attribute, med, ccna, neighbor, route, map, weight, local, preference, metric
5). Cisco CCNP / BSCI Exam Tutorial: The BGP Attribute MED
Your BSCI exam and CCNP certification success depend on mastering BGP, and a big part of that is knowing how and when to use the many BGP attributes. And for those of you with an eye on the CCIE, believe me - you've got to know BGP attributes like the back of your hand. One such BGP attribute is the Multi-Exit Discriminator, or MED.
The MED attribute is sent from a router or routers in one AS to another AS to indicate what path the remote AS should use to send data to the local AS.
Article tags: cisco, ccnp, bsci, bgp, attribute, tutorial, med, multi, exit, discriminator, pass, exam, metric, lowest, path, selection